Air Condition Trainer with Fault Insertion
AC-F6
Fully operational Air Conditioning Trainer
(AC-0101R using R143a or AC-0103R using R1234yf) with six in-built faults. Allowing student to test and determine common Air Conditioning faults/problems.
| Fault 1 | Open circuit in 12 volt supply to Trinary switch relay RL1 inactive |
| Symptom | Compressor clutch does not cut in |
| Fault 2 | Open circuit in evaporator fan speed circuit causing the fan not to work on second speed |
| Symptom: | Second speed of evaporator fan not working |
| Fault 3 | Short circuit causing evaporator fan to run continuously |
| Symptom | Evaporator fan will not switch off |
| Fault 4 | Fault in temperature control circuit symptom compressor will not cut out once engaged |
| Symptom | Temperature control only works in one position and then will not switch off causing pipe work to freeze back |
| Fault 5 | Condenser fan will not operate, N.B. Trinary switch should cut compressor out between 24 & 26 bar. |
| Symptom | Condenser fan not working causing an increase of pressure on the high side and the system is shut down by the trinary switch overload. |
| Fault 6 | Evaporator fan will not operate causing pipe work to freeze back. |
| Symptom | Evaporator fan not working causing low side to drop in pressure and temperature control not to operate correctly. Pipe work will also freeze back. |
| Fault: 7 | Close shut off valve to simulate a blocked orifice in the expansion valve. |
| Symptom | Valve shut off simulating a blocked orifice, the low side pressure drops to zero and the compressor overloads. |
This product is UK Conformity Assessed
Product Specifications
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
Dimensions
W x L x H: 1000mm x 750mm x 1950mm
Weight
110 Kg
Block Automotive design, engineer, fabricate and produce all their vocational training units at their bespoke facility here in Suffolk. We are extraordinarily proud to be part of the ‘MADE IN BRITAIN’ initiative, this brings together the British manufacturing community, united by the use of the registered collective mark.
The Block 2 Year Warranty
All equipment provided by Block Automotive is provided with the benefit of a 2 year warranty. The warranty will cover all aspects of mechanical failure.
Aftersales Care
Please contact our after sales team for any support or guidance that is required in respect of the products that we have provided you with. We will look to come back to you within 24 hours.
Training
Please contact our after sales team for any support or guidance that is required in respect of the products that we have provided you with. We will look to come back to you within 24 hours.
Want to know more about our Air Condition Trainer with Fault Insertion?
Simply complete our web form or give us a call on +44 (0) 1502 740 293 and one of our friendly team will deal with your enquiry promptly.